Electrolux WT55 Hood Dishwasher

The Electrolux Dishwashing range is designed to meet the most demanding customers requirements for efficiency, economy, ergonomy and environmental concern and meets WRC requirements. The product range comprises of glasswashers, undercounter dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot and pan washers.

The hood type WT55 dishwasher is suitable for straight through or corner operation and has a capacity of up to 65 racks per hour. Available as one model only but meets varying operator requirements. Supplied as standard for connection to a 230V single phase electrical supply and a hot water supply, but can be converted on installation to operate from a 415V three phase electrical supply and the enhanced 9kW boiler heaters enable the dishwasher to be connected to a cold water supply.

748 (w) x 833 (d) x 1515 (h)

⢠Integral class 'A' type air break for direct connection to mains water supply.

⢠WRC listed.

⢠Integral rinse booster pump.

⢠Built-in peristaltic pumps for detergent and rinse aid.

⢠Built in drain pump.

⢠Suitable for gravity drain to a point up to 500mm above floor level.

Electrical requirement: 10.2kW 44.35 Amps

As standard machine is set up for 230 Volt Single Phase supply. Conversion to 400 Volt 3 Phase is feasible on install.

⢠Automatic operation on closing the hood plus standby position that allows the hood to be raised and lowered without a wash cycle being initiated.

⢠Spring balanced hood with safety switch. Boiler provides a Guaranteed Rinse System with water temperature at 84°C for 16 seconds. A thermal lock device automatically extends the wash until a temperature of 84°C is reached for rinsing.

⢠Built-in pumps for detergent and rinse aid contributes to a perfect result and low consumption of chemicals.

⢠Operator choice of three different washing cycles: light soiled items (55 seconds), standard soil (75 seconds) and stubborn soiled items (300 seconds).

⢠Simple to use control panel.

⢠Two automatic programmes plus continuous for varying levels of soiled items.

⢠Stainless steel construction.

⢠WT55 has an 'L' shaped deep drawn for increased energy savings.

⢠Wash and rinse arms are easy to remove for thorough cleaning without the use of tools.

⢠Large scrap boxes above the 'L' shaped wash tank and extra filter in the tank bottom at the pump inlet.

⢠Simple service from the front.

⢠One model for all customer requirements is finished in top quality
materials to aid durability.

⢠98% recyclable by weight

⢠CFC free packaging.

⢠Low noise level <70dBA

⢠Developed and produced in ISO 9001 certified factory.